Varseo S
The 3D printing system specially developed for dental uses with an innovative cartridge system
The new smart 3D printer Varseo S – as the further development of Varseo – will delight you with it̍s compact and stylish design and the following features:
- Variability:
- Extensive and expandable range of materials and indications
- Speed:
- High construction speed independent of the number of elements to be produced
- User-friendly display for quick and easy access to all important functions
- Network capability of the device permits rapid BEGO service via remote control
- Efficiency:
- Approximately 30% larger building plate than the previous Varseo model allows simultaneous printing of even more objects
- Unique cartridge system
- Material change in seconds
- Low material consumption
- Minimal material ageing
- Simple material handling and storage – directly in the cartridge, without decanting
- Openness:
- “Open STL file” device for all dental software solutions
DLP technology
The 3D printing system Varseo S uses a special variation of stereolithography, the so called DLP technology (Digital Light Processing). The hardening of the resin is caused by selective mask illumination. With a modern illumination process, complete slices are projected on the resin and illuminated areas are cured. The three-dimensional object is created through the successive stacking of two-dimensional layers. The DLP technology allows a significantly faster printing than classical laser-based 3D printing technologies. The high surface accuracy resulting from the printing process ensures an exceptional fit of the printed objects.
| Physical data | |
|---|---|
| Height | 748 mm |
| Width | 362 mm |
| Depth | 461 mm |
| Weight | 47 kg |
| Nominal voltage | 100 – 240 VAC, 50/60 Hz |
| Rated capacity | 100 VA |
| Dimensions (L × W × H) | 110 × about 65 × 85 mm |
| Resolution | 60 μm (± 30 μm) |
| Layer | 50 – 100 μm |
| Building speed | 20–40 mm/h |
| Availability | Quantity | REF |
|---|---|---|
| Original Varseo S operating instructions | 1 | 86087 |
| Wooden spatula, not sterile | 1 | 19548 |
| Bubble syringe, sterile | 1 | 19549 |
| Stainless steel spatula | 1 | 19550 |
| Card set, blank | 1 | 19551 |
| Torque screwdriver 1.5 Nm | 1 | 19556 |
| TORX Bit T20×25 mm | 1 | 19557 |
| O Ring 128x3Vi399 / FKM 90 | 1 | 19524 |
| Protective resin bottle cap | 1 | 19563 |
| Electricity cable | 1 | 12622 |
| USA mains power cable | 1 | 12554 |
| Test gauge, small | 1 | 19409 |
| Test gauge, large | 1 | 19410 |
| WLAN USB adapter, 150 Mbit/s, high gain | 1 | 20119 |
| Varseo S cartridge | 1 | 20008 |
| Adhesion preventive film | 1 | 19778 |
| Special USB stick, calibration file | 1 | |
| CAMbridge licence dongle | 1 | 20370 |
| Material packages | Quantity | REF |
|---|---|---|
|
Material package VarseoWax CAD/Cast (VarseoWax CAD/Cast 1 kg + cartridge incl. stamp + VarseoVest P 6 kg) | 1 | 41053 |
|
Material package VarseoWax Tray (VarseoWax Tray 1 kg + cartridge incl. stamp) | 1 | 41054 |
|
Material package VarseoWax Surgical Guide (VarseoWax Surgical Guide 1 kg + cartridge incl. stamp) | 1 | 41055 |
|
Material package VarseoWax Model (VarseoWax Model 1 kg + cartridge incl. stamp) | 1 | 41057 |
|
Material package VarseoSmile Temp A2 (VarseoSmile Temp A2 500 g + cartridge incl. stamp) | 1 | 41070 |
|
Material package VarseoSmile Temp A3 (VarseoSmile Temp A3 500 g + cartridge incl. stamp) | 1 | 41059 |
|
Material package VarseoSmile Temp C2 (VarseoSmile Temp C2 500 g + cartridge incl. stamp) | 1 | 41071 |
Contact / Service
BEGO USA Inc.
24 Albion Road
Suite 103
Lincoln, RI 02865
Phone: 800 342 2346
Cell: 774 571-0395
Fax: 401 334-9265
E-Mail: info@begousa.com