Gelovit 200

Robust duplicating unit – reliable, consistent results

  • The programmable brushless motor offers greater reliability than conventional motors for unrivalled durability
  • Intelligent programming emphasises the unit’s reliability and long service life
  • Innovative preparation concept with intelligent temperature con- trol effectively prevents lumps forming in the hydrocolloid and guarantees the fastest possible preparation without scorching
  • The special heating strategy prevents residue deposits and noz- zle blockages whilst maintaining homogeneity
  • A third temperature level minimises the heat shrinkage of the hydrocolloid and ensures an optimal fit
  • The time at which the hydrocolloid is required to be ready can be easily pre-programmed for optimum processing.
  • The number of required melting cycles can be entered individu- ally. This ensures consistent quality of the duplicate models.
  • The clearly laid out display provides information on all parameters and gives quick and easy access to all important functions
Reliable technology with an innovative preparation concept

The Gelovit 200 offers a durability unmatched by any other duplicating unit. This is due to the fail-safe agitator drive. Its brushless motor has been specially designed to cope with persistent use; non-wearing and maintenance-free, it also has the advantage of high torque.

The programmable drive facilitates an intelligent preparation concept, in which the agitation process and the temperature controls guarantee precision warm-up and cool-down phases.

The advantages for you:

  • Gel quickly ready for use
  • Residue deposits and nozzle blockages are prevented; the gel quality remains consistent
  • Efficient cooling system ensures high processing reliability for rapid provision of the duplicating gel
Intelligent programming and simple, convenient operation

A 4-zone heating system ensures an even distribution of heat throughout the gel. Very sensitive sensors with an extremely low temperature tolerance of ± 0.5 °C monitor the temperature parameters. Monitoring of the heating cycle guarantees the correct gel moisture content. A signal lamp indicates when it is time to change the gel, thereby ensuring continued processing reliability. The time at which the gel is required to be ready can be individually pre-programmed up to 99 hours in advance.

The clearly laid out display provides continuous information on the device’s operating status. It shows the current gel temperature, time and service messages if intervention by the user is required.

The advantages for you:

  • The duplicating gel is heated very quickly yet gently at the same time, without scorching
  • High quality standards and consistent reliability thanks to programmable heating cycles. With up to 15 melting cycles, the BEGO duplicating gel materials offer very cost-effective and yet still accurate duplications
  • Simple and convenient programming of the device for customised provision of the gel
Optimal fit results thanks to the third temperature setting

As soon as the duplicating gel working temperature has been reached, Gelovit 200 ensures that this exact temperature is maintained. There is also the possibility of removing the gel at a lower temperature.

The advantages for you:

  • This precise regulation of the temperature prevents the duplicating material from becoming either too hot or too cold – both situations would have a negative effect on the impression quality
  • The lower temperature setting reduces heat shrinkage of the gel effectively and allows optimal  t results
Safe processing

The design of the outlet valve is especially safe and simple: Upon closing, it presses the still hot duplicating material back into the container. Upon opening the cover, the redundant safety switches in the cover of the duplicating material container immediately interrupt operation of the heater and agitator.

The advantages for you:

  • The outlet valve prevents solidifying material from blocking the valve. In addition, the practical outlet height allows residual gel to be drawn off directly into a tub
  • The redundant safety switches ensure optimal safety for the user during cleaning and  lling of the Gelovit 200
Technical data    
Height 22.24 inches  
Width 12.20 inches  
Depth 13.97 inches  
Rated voltage 200–230 V, 50/60 Hz  
Special voltages on request 100–240 V, 50/60 Hz  
Power at rated voltage 230 V 900 W  
Capacity 3–6 kg Weight
Delivery forms Unit Weight REF
Gelovit 200, 230 V, 50/60 Hz 1 20 kg 26330
Accessories Contents Presentation Qty REF
WiroGel M duplicating material for plaster, investment material and acrylic work 1 tub 10 kg 54354  
Castogel® duplicating material 1 tub 6 kg 52052  
Combi duplicating ask with wedge top, 1 base and 2 base formers 1   52090  

Images and illustrations are examples; colors, symbols, designs and information on the depicted labels and/or packaging may differ from reality.

Contact / Service

BEGO USA Inc.
24 Albion Road
Suite 103
Lincoln, RI 02865

Phone: 800 342 2346
Cell: 774 571-0395
Fax: 401 334-9265
E-Mail: info@begousa.com