3D printing world premiere – VarseoSmile Crown plus  — The world´s first hybrid material for 3D printing of permanent restorations

VarseoSmile Crown plus

The tooth-colored ceramic filled hybrid material for 3D printing of permanent single crowns, inlays, onlays and veneers

Advantages for the laboratory

  • Specially for the resin developed printing and processing parameters ensure smooth production sequences with reproducible results at any time
  • High dimensional stability and strength of the printed objects due to high values of flexural strength and flexural modulus – therefore precise fit
  • Minimized resin sedimentation for easy handling, no mixing or shaking necessary with regular use
  • Easy to grind and polish by using standard tools
  • Seven shades according to the proven VITA* classical shades:
    A1, A2, A3, B1, B3, C2, D3
  • Satisfies all the requirements for a Class IIa** medical device

Advantages for the patient

  • Excellent aesthetics thanks to a balanced ratio of opacity and translucency
  • Low tendency to age and discolor thanks to very low water absorption
  • Low plaque accumilation due to smooth surface
  • High comfort thanks to low cold and heat sensitivity
  • Antagonist-friendly material with mechanical buffering effect – ideal for implant-supported crowns
  • Minimized formation of secondary caries thanks to a high adhesive bond with luting composites
  • High biocompatibility due to very low water solubility – therefore not cytotoxic, not genotoxic, not toxic, not irritating and not sensitizing

Individualization with stains

The individualization of the post-cured objects is possible with composite stains and is the responsibility of the user. Follow manufacturer‘s instructions.

Note for practitioners

VarseoSmile Crown plus can be attached using self-adhesive cements (e. g. RelyX Unicem*, 3M Espe*) or composite cement with a primer (e. g. Variolink Esthetic DC* and Monobond Plus*, Ivoclar Vivadent*). Observe the instructions for use of the luting agent.

Light-curing

The light polymerization can be achieved with the BEGO Otoflash (two xenon stroboscopic lamps, flash frequency 10 Hz, light spectrum 300 – 700 nm) or with the HiLite Power*, Fa. Heraeus Kulzer* (one xenon stroboscope lamp, flash frequency 20 Hz, light spectrum 390 – 540 nm).


Required light-curing time
Light-curing device Light-curing Comments
BEGO Otoflash (with protective gas) 2 × 1,500 flashes Turn object between the exposure cycles
HiLite Power 2 × 90 seconds
Product details
Color A1, A2, A3, B1, B3, C2, D3
Density approx. 1.4 – 1.5 g/cm³
Layer thickness 50 μm
Viscosity 2,500 – 6,000 MPa*s
Flexural strength 116 MPa
Flexural modulus 4,090 MPa
Water solubility 0.23 µg/mm³
Water sorption 3.6 µg/mm³
Wavelength 405 nm
Availability
Availability Contents REF
VarseoSmile Crown plus A1 0.5 kg bottle 41107
VarseoSmile Crown plus A2 0.5 kg bottle 41108
VarseoSmile Crown plus A3 0.5 kg bottle 41109
VarseoSmile Crown plus B1 0.5 kg bottle 41110
VarseoSmile Crown plus B3 0.5 kg bottle 41111
VarseoSmile Crown plus C2 0.5 kg bottle 41112
VarseoSmile Crown plus D3 0.5 kg bottle 41113
VarseoSmile Crown plus A1 0.25 kg bottle 41117
VarseoSmile Crown plus A2 0.25 kg bottle 41118
VarseoSmile Crown plus A3 0.25 kg bottle 41119
VarseoSmile Crown plus B1 0.25 kg bottle 41120
VarseoSmile Crown plus B3 0.25 kg bottle 41121
VarseoSmile Crown plus C2 0.25 kg bottle 41122
VarseoSmile Crown plus D3 0.25 kg bottle 41123

3D Printers – for Processing BEGO 3D Printing Materials

BEGO Varseo XS

Compatible 3D Printers at a Glance

More 3D printing materials

VarseoSmile Crownplus

VarseoSmile Temp

VarseoWax Tray

VarseoWax Surgical Guide

VarseoWax Model

VarseoWax CAD/Cast

VarseoVest P plus

VarseoVest C&B

Images and illustrations are examples. Colors, symbols, designs, and information on the depicted labels and/or packaging may differ from reality.